Bollard Installation

Bollard Installation FAQs

Straight answers to the questions we're asked most.

How much does it cost to install a bollard on a driveway?

A lockable telescopic driveway bollard typically costs £350 to £650 fitted, including the ground socket, concrete and making good. Fold-down bollards are cheaper at around £250 to £450 because they need less digging. Prices per bollard drop when several are fitted at once.

Do I need planning permission for bollards?

On your own private land, simple manual bollards usually do not need planning permission. Bollards on the pavement or public highway need the highway authority's agreement. Listed buildings, conservation areas and large automatic installations may need consent, so check with your council if you are unsure.

What is the difference between telescopic and fold-down bollards?

A telescopic bollard drops down into a sleeve in the ground and sits flush, so you can drive straight over it. A fold-down bollard hinges flat on the surface. Telescopic types need a deeper hole but leave nothing to trip over; fold-down types suit shallow ground.

How deep does a bollard need to be?

It depends on the type. Telescopic bollards usually need a hole 900mm to 1,100mm deep. Root-fixed steel bollards are commonly set 400mm to 600mm into concrete. Automatic rising bollards may need more than a metre, and crash-rated bollards follow the manufacturer's tested foundation design.

Can bollards be fitted on block paving?

Yes. Block paving is one of the easiest surfaces to work with, because the blocks are lifted, the socket or foundation set in concrete, then the blocks relaid and cut neatly around the bollard. The finish is usually much tidier than a patch in tarmac.

Can I put a bollard in front of my drive on the pavement?

Not without permission. The pavement is usually public highway, controlled by the local highway authority. You can only install bollards there with their agreement, which is rarely given for private parking. Bollards on your own land, behind the boundary, are fine.

Will a bollard stop a car being stolen?

A sturdy telescopic or fold-down bollard in front of a car makes it much harder to drive away and acts as a visible deterrent. It is not a guarantee, but combined with a steering lock and good lighting it adds a useful layer of security.

How long does bollard installation take?

A single manual bollard usually takes two to three hours to fit. Several bollards can be done in a day. Concrete needs a day or two before the bollard takes heavy use. Automatic rising bollards take three to five days including excavation, cabling and testing.

What is a PAS 68 bollard?

PAS 68 is a British vehicle impact test specification for security barriers. A PAS 68 bollard has been crash-tested to stop a vehicle of a stated weight at a stated speed. The rating only applies if the bollard is installed on the foundation it was tested with.

How far apart should bollards be?

To stop cars while letting pedestrians, wheelchairs and buggies through, bollards are usually spaced with clear gaps of around 1.2 to 1.5 metres. Security bollards are often closer, as the gap must stop smaller vehicles. Your installer will set spacing to suit your site.

What maintenance do bollards need?

Manual telescopic bollards benefit from clearing grit out of the socket, lubricating the lock and checking the drainage every few months. Automatic rising bollards need professional servicing, usually at least twice a year, to check hydraulics, seals, safety loops and signals.

Can a damaged bollard be replaced without digging up the foundation?

Often, yes. If the socket or base is undamaged, a new insert or post can be fitted into it. If the bollard was bent at ground level or the concrete has cracked, the old foundation is broken out and a new one set.

Get a free bollard installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote