Bollard Installation
Bollard Removal and Replacement
Taking out damaged, seized or unwanted bollards, filling or reinstating the surface, and fitting new posts in the same or new positions.

What's involved
Bollards get hit by cars, telescopic posts seize with grit and rust, and locks fail. Often the existing socket can be cleaned out and a new insert fitted, which is quicker and cheaper than starting again. Where the bollard has been bent at the base or the foundation has cracked, the installer breaks out the old concrete, removes the casing and sets a fresh foundation. Unwanted bollards are cut or dug out and the surface is made good to match as closely as possible, using reclaimed block paving or a neat tarmac or concrete patch. Most removals and replacements take two to four hours per bollard. If you know the make and model of a seized telescopic bollard, include it in your request, as replacement inserts are available for many common types.
How we handle it
Describe the problem
Use the quote form to say what you want to stop, how many bollards you think you need, the type of surface and any access needs. Photos of the area and your preferred positions help installers price accurately.
Survey and service check
The installer confirms positions, checks spacing for pedestrians and cars, and scans for buried cables and pipes. For rising or security bollards, they also check drainage, power and vehicle approach routes.
Clear quote
You receive one price covering the bollards, excavation, concrete, making good and removal of spoil. The quote states the bollard model, finish and foundation depth so you know exactly what is being fitted.
Installation
The surface is cut or lifted, holes dug, sockets or foundations set in concrete and the surface reinstated. Standard bollards are fitted in hours; automatic systems take several days with cabling and commissioning.
Handover
The installer hands over keys, explains how to lock and lower each bollard, and advises how long to wait before driving over new concrete. Automatic systems come with testing records and a service schedule.
Price guide
Bollard prices depend on the type of bollard, how many you need and what the ground is like. A single telescopic driveway bollard in block paving is a modest job, while automatic or crash-rated bollards involve deep excavation, drainage and power. The guide prices below are for typical UK installations in 2026, including supply and fitting.
- Crash-rated security bollard: from £3,000. Per bollard installed, depending on impact rating, foundation design and site conditions.
- Automatic rising bollard: from £6,500. Per bollard installed, with control panel, safety loops and signals; pairs share some costs.
- Removable bollard with socket: £280–£500. Per bollard, including lockable ground socket and cover for when the post is out.
Questions about bollard removal and replacement
How much does it cost to install a bollard on a driveway?
A lockable telescopic driveway bollard typically costs £350 to £650 fitted, including the ground socket, concrete and making good. Fold-down bollards are cheaper at around £250 to £450 because they need less digging. Prices per bollard drop when several are fitted at once.
Do I need planning permission for bollards?
On your own private land, simple manual bollards usually do not need planning permission. Bollards on the pavement or public highway need the highway authority's agreement. Listed buildings, conservation areas and large automatic installations may need consent, so check with your council if you are unsure.
What is the difference between telescopic and fold-down bollards?
A telescopic bollard drops down into a sleeve in the ground and sits flush, so you can drive straight over it. A fold-down bollard hinges flat on the surface. Telescopic types need a deeper hole but leave nothing to trip over; fold-down types suit shallow ground.
Other services
Telescopic Driveway Bollards
Lockable posts that drop down into a ground socket so you can drive over them, then pull up and lock to stop anyone else parking.
Fold-Down and Removable Bollards
Hinged bollards that fold flat with a key, or posts that lift out of a ground socket, for occasional access to drives and service roads.
Fixed Steel and Decorative Bollards
Permanent steel, stainless, cast iron or timber bollards to define pedestrian areas, protect buildings and stop vehicles mounting kerbs.
Automatic Rising Bollards
Powered bollards that rise and lower on command, controlled by fobs, keypads, intercoms or number-plate cameras, for private roads and secure sites.
Security-Rated Bollards
Crash-tested bollards for shopfronts, public spaces and sensitive buildings, specified to stop a vehicle of a given weight and speed.
Bollard Removal and Replacement near you
Get a free bollard installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote