Guide · Businesses and homeowners · 3 min read · Updated 17 November 2026
Bollard Rules in the UK: Highways, Accessibility and Security Ratings
Short answer
In the UK, bollards on the public highway or pavement need the local highway authority's agreement, and you can only install them on land you own or control. BS 8300 gives accessibility guidance, including visible height and colour contrast and avoiding chains between bollards. Crash-rated bollards are tested to standards such as PAS 68, IWA 14-1 and BS ISO 22343, and automatic bollards need a risk assessment and safety measures.
Where you can and cannot install bollards
The first rule is simple: you can only install bollards on land you own or control. The pavement, verge and road outside most properties are part of the public highway, even if they look like part of your frontage. Placing bollards there needs the agreement of the local highway authority, which is usually the county, unitary or metropolitan council, or the relevant authority in Scotland and Wales.
On shared driveways and private roads, check the deeds and any rights of way before installing bollards. Blocking another person's legal right of access can lead to disputes, so agree the plans with anyone else who has rights over the land.
- Your own driveway or forecourt: usually fine
- Pavement, verge or road: highway authority agreement needed
- Shared drives and private roads: check rights of way
- Listed buildings and conservation areas: check with the council
The key standards and rules
Several real standards and rules apply to bollards, depending on the type and location. The table summarises the main ones and what they mean in practice.
| Rule or standard | Applies to | What it means |
|---|---|---|
| Highway authority agreement | Bollards on public highway | Consent needed before installing |
| BS 8300 | Accessible design | Visible height and contrast, avoid chains between posts |
| PAS 68, IWA 14-1, BS ISO 22343 | Crash-rated bollards | Tested to stop a vehicle of set weight and speed |
| BS 7671 | Powered bollards | Electrical supply installed correctly |
| Risk assessment | Automatic rising bollards | Safety measures such as loops, lights and signs |
Accessibility and BS 8300
Bollards in places people walk must not become hazards. BS 8300 gives guidance on accessible design in the built environment, and it covers bollards. In practice, that means bollards tall enough to be seen and detected, a contrasting band or colour so they stand out against the background, and enough space between them for wheelchairs, pushchairs and mobility scooters.
Chains or rails slung between bollards are best avoided in pedestrian areas, because they are hard for people with impaired sight to detect and can be a trip hazard. For shops, offices and public spaces, following this guidance helps meet duties to make premises accessible.
Crash-rated security bollards
Ordinary bollards stop casual parking and low-speed knocks, but they are not designed to stop a vehicle being driven at them deliberately. Where that risk exists, such as crowded public spaces, sensitive buildings or shopfronts vulnerable to ram raids, crash-rated bollards are needed. These are tested to standards such as PAS 68, IWA 14-1 and BS ISO 22343, which record the vehicle weight and speed the bollard stopped and how far the vehicle penetrated.
A rating only applies if the bollard is installed exactly as tested, including the foundation design. Changing the foundation to suit site conditions can invalidate the rating, so specialist design is often needed where there are buried services or shallow ground.
Automatic rising bollards and safety
Automatic rising bollards are powered machinery, and a bollard rising under a car or a person can cause serious harm. Installers should carry out a risk assessment and fit appropriate safety measures. Typical measures include detection loops in the road that stop the bollard rising while a vehicle is above it, traffic lights and warning signs, and sometimes photocells.
The electrical supply should be installed to BS 7671. Regular servicing keeps safety systems working, and records of maintenance should be kept, particularly on sites used by the public or employees.
Responsibilities after installation
Once bollards are in, whoever controls the land is responsible for keeping them safe. For homeowners, that mostly means keeping locks working and making sure a lowered telescopic cap sits flush so nobody trips. For businesses, landlords and managing agents, it means regular checks that bollards are upright, visible and undamaged, and that pedestrian routes past them stay clear and accessible.
Damaged bollards should be repaired or replaced promptly. A leaning post with exposed fixings or a broken socket cover can injure pedestrians or damage vehicles. Powered bollards need a documented maintenance regime, with safety loops, lights and signs tested at each service and records kept. On sites used by employees or the public, these records help show the equipment is being looked after properly.
If you take over a property with existing bollards, find out whether they are on your land or the highway, and whether any powered bollards have a service history. Bollards that were installed on the highway without consent may need to be removed if the authority asks.
Before you dig
Every bollard installation involves breaking ground, so checking for buried services comes first. Installers should scan for cables and pipes and check available utility records. Striking a gas pipe or power cable is dangerous and expensive, and finding a drain where a socket should go may mean moving the bollard or choosing a shallower type.
When you request quotes through us, your job goes to vetted, insured local specialists who check services before digging and can advise on permissions for your site.
Questions people also ask
Do I need planning permission for driveway bollards?
Usually not for bollards on your own driveway, as they are small and low. Bollards on the pavement or highway need the highway authority's agreement. If your home is listed or in a conservation area, or the bollards are part of a larger scheme, check with your council before going ahead.
What does a PAS 68 rating mean?
PAS 68 is a specification for testing vehicle security barriers. A rated bollard has been crash-tested against a vehicle of a stated weight and speed, and the rating records how far the vehicle penetrated. The rating only applies if the bollard is installed to the tested foundation design.
Are chains between bollards allowed?
Chains are not banned, but BS 8300 guidance advises against chains or rails between bollards in pedestrian areas because they are hard for people with impaired sight to detect and can be trip hazards. On private drives they are sometimes used, but in public areas solid bollards alone are safer.
Written and checked by the Bollard Installation team. Read our editorial policy.
More guides
Bollard Installation Cost UK: 2026 Prices by Bollard Type
In the UK in 2026, a telescopic driveway bollard typically costs £350–£650 fitted, a fold-down bollard £250–£450, a fixed steel or stainless bollard…
Telescopic vs Fold-Down vs Removable Driveway Bollards Compared
Telescopic bollards drop flush into a ground socket and are the neatest, most secure driveway option, costing £350–£650 fitted. Fold-down bollards…
How to Stop People Parking on Your Drive: Bollards and Other Options
The most reliable way to stop people parking on your private drive is a lockable bollard, usually a telescopic or fold-down post costing £250–£650…
Automatic Rising Bollards: Costs, Uses and What to Consider
Automatic rising bollards are powered steel posts that rise from the ground to block vehicles and lower to let authorised vehicles through,…
Get a free bollard installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote