North Ayrshire · Scotland
Bollard Installation in Irvine
From a single driveway post to a row of security bollards, our installers fit bollards throughout Irvine and the wider Scotland.
Irvine and the surrounding area
We cover all of Irvine and the wider North Ayrshire area. Jobs here are mostly in the KA11 and KA12 postcode areas. We also take jobs in Stevenston, Perceton and Springside.
Working in Irvine
Scotland's towns have a lot of sandstone and granite buildings, tenement flats and harled houses, with Scottish building standards rather than English Building Regulations applying. Some newer developments near Irvine have management company rules about bollards, so check your lease or covenants first. Frost around Irvine can freeze water inside bollard sockets, so installers add a gravel drainage layer beneath every telescopic sleeve.
Block-paved drives in suburban Irvine make bollard installation quick and tidy, with blocks relaid around the new socket. Homes near stations and schools in Irvine often suffer from commuter or drop-off parking on drives, which a single bollard usually solves.
Our services in Irvine
Automatic Rising Bollards
Powered bollards that rise and lower on command, controlled by fobs, keypads, intercoms or number-plate cameras, for private roads and secure sites.
Fixed Steel and Decorative Bollards
Permanent steel, stainless, cast iron or timber bollards to define pedestrian areas, protect buildings and stop vehicles mounting kerbs.
Fold-Down and Removable Bollards
Hinged bollards that fold flat with a key, or posts that lift out of a ground socket, for occasional access to drives and service roads.
Telescopic Driveway Bollards
Lockable posts that drop down into a ground socket so you can drive over them, then pull up and lock to stop anyone else parking.
Bollard Removal and Replacement
Taking out damaged, seized or unwanted bollards, filling or reinstating the surface, and fitting new posts in the same or new positions.
Security-Rated Bollards
Crash-tested bollards for shopfronts, public spaces and sensitive buildings, specified to stop a vehicle of a given weight and speed.
Guide prices for Irvine
- Automatic rising bollard: from £6,500. Per bollard installed, with control panel, safety loops and signals; pairs share some costs.
- Crash-rated security bollard: from £3,000. Per bollard installed, depending on impact rating, foundation design and site conditions.
- Telescopic driveway bollard: £350–£650. Per bollard, lockable steel post with ground socket set in concrete and surface made good.
Prices are a guide. Your quote for Irvine is a fixed price based on the details you give us. Full price guide.
Bollard Installation questions from Irvine
Do your installers cover areas near Irvine?
Yes. Our network covers Irvine as well as surrounding areas including Kilwinning and Kilmarnock. Enter your postcode on the quote form and we will find an installer near you.
Can you replace a broken bollard in Irvine?
Yes. Specialists covering Irvine can fit new inserts into undamaged sockets, or break out and replace damaged foundations, then make good the surface to match.
Do you fit automatic rising bollards in Irvine?
Yes. Our network includes specialists across North Ayrshire who install and service automatic rising bollards with fobs, keypads, intercoms or number-plate recognition.
How quickly can a bollard be fitted in Irvine?
Standard manual bollards in Irvine can often be fitted within one to two weeks of booking, and the work itself takes a few hours. Automatic and crash-rated bollards have longer lead times.
What is a PAS 68 bollard?
PAS 68 is a British vehicle impact test specification for security barriers. A PAS 68 bollard has been crash-tested to stop a vehicle of a stated weight at a stated speed. The rating only applies if the bollard is installed on the foundation it was tested with.
How deep does a bollard need to be?
It depends on the type. Telescopic bollards usually need a hole 900mm to 1,100mm deep. Root-fixed steel bollards are commonly set 400mm to 600mm into concrete. Automatic rising bollards may need more than a metre, and crash-rated bollards follow the manufacturer's tested foundation design.
Helpful guides
Bollard Rules in the UK: Highways, Accessibility and Security Ratings
In the UK, bollards on the public highway or pavement need the local highway authority's agreement, and you can only install them on land…
Read the guide →Telescopic vs Fold-Down vs Removable Driveway Bollards Compared
Telescopic bollards drop flush into a ground socket and are the neatest, most secure driveway option, costing £350–£650 fitted. Fold-down…
Read the guide →Get a free bollard installation quote in Irvine
Tell us what you need and we'll come back with a clear price.
Request a quote